2 CNC End Milling Ways :

Welcome Guest! Would you like to log yourself in?

Monday 23 November, 2015 |

by astech-cnctools

2 CNC End Milling Ways

Worktable will be rough and uneven after a long time using. It is related to the use of day-to-day habits.

Today, we introduce 2 simple methods of cnc end milling as follows.

1. Usually, there is common processing in the control software:

(1) Construct a rectangle, and the size is the same as cnc worktable.

(2) Set up parameters, such as starting point, cnc tools size, area of table top cnc milling, engraving depth (for example, 0.5-1mm), sintered bits spacing, etc.

(3) Then, 2D cnc end milling.

It is the same to mill double-color board as usual.

(4) Change a thicker twist drill.

(5) Warm notice:

① Different table materials should select different feeding velocity.

② The carving thickness is based on actual situation.

Basically, it is deep to no sunken place.

(6) At last, clean it.

2. Apply the specified straight cutting tool.

Usually with diameter 6mm, cutting length 20 or 25mm.

It has very fast speed especially on PVC board.

Besides 2 CNC End Milling Ways, you maybe also interested in 4mm shank diameter metal carving tools.