4 Notices of CNC Machine Cutting Bits
4 Notices of CNC Machine Cutting Bits
(Ⅰ)
What should pay attention to the use of CNC machine cutting bits?
1. Touch sharp cnc cutting edge by hand directly, causing injury.
Protective measure: use gloves while removing diamond router bits from packing case or installing into router machinery.
2. Using wrong methods or inappropriate operation condition, resulting in damage and spiral bit flew off.
Precautions:
(1) Protect eyes by safety guard;
(2) Read operating instruction carefully;
(3) Apply recommended machining condition or parameters, including on cnc machine cutting bits.
3. The cutting force rose dramatically because of impact load and excessive wear, leading to flute endmill flew out, and hurt operating staff.
Cautions:
(1) Wear protection cover, such as safety glasses;
(2) Replace carbide end mill cutters timely;
4. Cutting splatter under high temperature and large chip output can hurt, even burn operators.
Notices:
(1) Put on protector, such as shield, protective gloves;
(2) Stop machine, clean scraps by clamps, etc.
This can also protect cnc machine cutting bits.
News for Tuesday 15 December, 2015
View all news for Tuesday 15 December, 2015 on one page
Recent News
- Monday 14 December, 2015
- Thursday 10 December, 2015
- Wednesday 09 December, 2015
- Tuesday 08 December, 2015
- Monday 07 December, 2015