Welcome Guest! Would you like to log yourself in?
  • Home
  • Log In
  • USD
  • likes
    0
  • Cart
    0
    • Wednesday 15 October, 2014 | RSS Feed

    CNC Router Operation Precautions

    by astech-cnctools

    CNC Router Operation Precautions

    (Ⅳ)

     

    1.    CNC router operation precautions for operator:

    (1)    CNC router operator must be trained strictly and meet practice requirements;  

    (2)    Cnc machine is operated according to cnc router operating precautions and guide;

    (3)    Note: be more careful to the safety of people and machine;

     

    2.    Cnc router operation precautions for running & installing mill bits:

    (1)  Ensure to open the cooling water pump while running;

    And, check regularly if cnc router spindle is overheating;

     

    (2)  While installing cnc router bits:

    ①   First, insert router collet into screw nut;

    ②   Then, insert router bit into the collet;

    ③   At last, tighten the screw nut;

    ④   Or else, it is noisy and easy to be broken;

     

    3.    CNC router operation precautions on replacing:

    (1)  Replace cnc router tools:

    ①   Don't use too much force while changing;

    Tighten the collet are appropriate;

    ②   Must with suitable collet adapter accordingly;

    The collet adapter must be cleaned before installed cnc cutter and there is no dirt and sundries clinging to the adapter;

     

    (2)  Replace cnc router spindle:

    After changed, should with correct rotation direction;

     

    (3)  After reinstalling NC Studio control system (WeiHong Control System):

    ①    Set correct parameters;

    ②    Adjust spindle to suitable rotating speed;

    Usually the rotation speed is 24000r/m; 

    4.   CNC router operation precautions on maintenance:

    (1)  Please clean regularly;

    (2)  Keep no debris and sundries in cnc router rails (ball screw and linear guide rails);

    (3)  After each use, clean cnc router rails by 20# engine oil;

    If have automatically lubricators, double-click it after start every day;

    (4)  While carrying the router machine, especially for long distance, it must be guide by professional;

     

    5.    CNC router operation precautions on warm notice:

    (1)  Make spindle breaks two-hour every day;

    (2)  Don't use the machine in extreme heat, cold, dust or humidity situation,

    10°C-30°C temperature is preferred;

    (3)  If cnc router appear any abnormal situation, please don't dismantle, repair and transform privately, in order to avoid man-made damage;

    (4)  Don't plus and remove cable, cards and electrical parts under the condition of electrification;

    (5)  While processing combustible materials (such as organic materials), the working site must be taken effective fire prevention;

     

     

    Besides CNC Router Operation Precautions, you may also interest in:

    CNC Router Precautions For Use (Ⅰ)

    CNC Router Operation Cautions (Ⅱ)

    CNC Router Operation Procedure (Ⅲ)

     

     

    News for Tuesday 14 October, 2014

    View all news for Tuesday 14 October, 2014 on one page

    Recent News

    News archive