Necessary Router Bits Run-in Process
Necessary Router Bits Run-in Process
Router bits run-in process is very necessary, especially try diamond tools for the first time!
Or, will cause tool breakage, accelerate tool wear, and affect service life of granite stone tools.
Router bits wear out is divided into three phases: initial wear stage, normal wear stage, acutely wear stage.
To initial wear stage, the main wearing reason is that, the cutter temperature is too low to reach the best cutting temperature. At this time, the tool wear types mainly are abrasive wear. Such wear has big effect to ball end router bits, and easily lead to tool breakage if not processed properly. Therefore, it is a very dangerous stage.
To avoid tool breakage, router bits run-in process is much essential. After we practice repeatedly with the same machining parameters, we have proved that tool life has increased two times after router bits run-in process.
The way of router bits run-in process:
1. Keeping reasonable spindle speed;
2. Reduce the feeding speed to half;
3. The processing time is about 6~10 minutes.
Then, the cutting temperature will increase gradually to reasonable or suitable temperature.
Besides Necessary Router Bits Run-in Process, you may also interest in:
1) Six Point to Improve Tool Durability;
2) How to Reduce Tool Beat.
News for Thursday 04 December, 2014
View all news for Thursday 04 December, 2014 on one page
Recent News
- Wednesday 03 December, 2014
- Monday 01 December, 2014
- Thursday 27 November, 2014
- Wednesday 26 November, 2014
- Tuesday 25 November, 2014