The Solution to your Spindle Repair Needs :

Welcome Guest! Would you like to log yourself in?

Monday 03 November, 2014 |

by astech-cnctools

The Solution to your Spindle Repair Needs

Ten Most Common Spindle Failure (Ⅱ)

Today, let’s go on the solution to your spindle repair needs!

3. The third spindle repair for –

Abnormal noises in cnc motor:

(1) Warm notice: this reason is more complex. It’s better find knowledgeable people or professionals to repair this spindle problem.

(2) Spindle repair solution:

① Check whether spindle motor is running overloaded.

② Failure in the motor:

Repair or replace it.

4. The fourth spindle repair for –

The sound of rotating spindle is unusual:

(1) Inverter setting is incorrect.

(2) CNC spindle is stopped.

Such as caused by broken CNC tools.

(3) Router spindle has its own problems:

Spindle bearing is damaged.

5. The fifth spindle repair for –

Appears excessive noise while cnc router spindle is rotating:

(1) The dynamic balance of spindle parts is not good, which causes heavy vibration during spindle rotation.

Spindle repair solution:

① Find professionals from cnc router manufacturer.

② Recheck and readjust dynamic balance to all the spindle parts.

(2) Transmission gears wear out, which makes occlusal gear gap too big.

So, when machine spindle is turning around, it will result in excessive noise because of heavy shock and vibration.

Spindle repair on the gears:

① Check;

② Repair;

③ Replace;

(3) Steady bearing is brushed or damaged:

Replace the motor bearing.

(4) Spindle conveyor is loose or wearing:

Readjust or change the conveyor belt.

Besides The Solution to your Spindle Repair Needs (Ⅱ), you may also interest in:

Ten Most Common Spindle Failure (Ⅰ);

Spindle Fault and Solution (Ⅳ).