What Should Notice During Machining?
What Should Notice During Machining?
During processing, we should notice the protection for all devices of CNC router machinery.
1) Protect tool auto-checking instrument, to avoid much oil erosion.
2) Pay attention to the flying chips. Chips are very harmful to machine tools. If drop into the electric controller cabinet, it will result in short circuit; if on the guide rails, it will reduce lifetime of lead screw and rails. So when work machining, we must cover up and seal the main parts of cnc lathe.
3) During working process, do not get close to the cutting area for observation, in order to avoid chips hurting the eyes.
4) Do not hastily and suddenly open - close cnc equipment door. While finish machining, the impact and vibration during opening door will lead to blade lines on the machined surface.
5) Spindle should first start rotating, and then processing later. Or, if it just starts working while not reach wanted rotate speed because of spindle slow run-up, the motor will hold back and shut up.
6) When spindle motor is revolving, do not perform any operation on the worktable.
7) Do not put any router cnc bits or work pieces on the machine beams.
At last, another important thing we should note that, when you first operate the CNC lathe, do not touch unfamiliar switch buttons without permission, in case the causes harm to lathe tool or personal injury. And if the router machine does not work, we also should not remove some parts to repair with your own hands, or it may pull apart some line accidently.
News for Saturday 20 September, 2014
View all news for Saturday 20 September, 2014 on one page
Recent News
- Friday 19 September, 2014
- Wednesday 17 September, 2014
- Monday 15 September, 2014
- Wednesday 10 September, 2014
- Monday 18 August, 2014